Mainly there are two components of a garage door. Either they swing up in a single piece, operate on the spring tension or they roll up in the sections. The garage doors usually move on the metal tracks located on the garage walls along with the heavy springs or spring that offer the power. Repairing the garage doors is the only option left when the garage doors don’t work in a proper manner.
You can repair the garage doors by connecting with the 24 hour garage door repair professionals, but it would cost more. In case you want to opt for the cheap garage door repair, then you can do it by your own. This blog will help you to do so with some easy repair tips.
- Check all the metal tracks and the mounting tracks, which hold the tracks to the wall. In case they are loose, then tighten the screws and bolts. Then examine the tracks to find out any crimps, dents or any flat spots. If you find any damaged spots, pound out the spots with a hammer or a rubber mallet and with a scrap wood block.
- Check whether the tracks are aligned properly. Both tracks should be at the same height of the garage walls. If they are not properly aligned then loose and tap the tracks very carefully into the right position. Recheck the level to confirm whether the tracks are in the right position. Then tighten the screws in the mounting brackets.
- The next step of cheap garage door repair service is to clean the garage door tracks with any concentrated household cleaner in order to remove the hardened grease and dirt. Thoroughly clean the rollers and the tracks and then wipe them dry.
- Last but not the least, check for the loose hardware and tighten them if any according to the requirements. In case of the roll up doors, check the hinges that hold the doors together. In case you find any problem in any screw, replace them immediately.
Want some more information about the garage door repair services or the automatic garage door repair service, then you can visit www.doorwindowrepairs.com.